TPI OIL

For more information, please follow our WeChat public number “TPI Green Lubrication” or visit TPI's official website - www.tpioilchina.com.

The aluminum processing industry has a wide range of equipment, high equipment levels and strict lubrication requirements. From alumina and electrolytic aluminum production to casting, rolling, profile production and processing of various end products, TPI provides high performance products such as gear oils, bearing oils, high-pressure hydraulic oils, anti-flammable hydraulic oils, screw compressor oils, centrifugal oils, high temperature chain oils, high and low temperatures, and heavy-duty greases, etc., and our recommended products have been approved by authoritative certificates such as Parker Dennison, Eaton, and Flanders, and are widely trusted by users in the aluminum industry. Approved by Parker Danielson, Eaton, Flanders and other authoritative certificates and OEMs, the recommended products are widely trusted by users in aluminum industry.

Mold Release Agents for Casting Processes

Casting is a key process from primary aluminum to aluminum alloy, and the casting products include flat ingots and round ingots of various sizes.TPI provides a full range of flat ingot casting release agents, round ingot casting release agents and release coating protectants according to the characteristics of the flat ingot and round ingot casting equipments and processes. Compared with traditional graphite lubricants, vegetable oils, etc., TPI mold release agents have high flash point and high viscosity index, excellent thermo-oxidative stability and high-temperature cleanliness, low volatility, and inhibit carbon build-up. With better adhesion and cleanliness, the amount of mold release agent can be greatly reduced. For all types of aluminum and aluminum alloys, TPI has a release product to suit the user's process requirements, whether automated oiling or manual brushing. Our service team will also recommend the most suitable mold release products according to the user's process characteristics, to ensure the stable operation of the casting process and guarantee the quality of products. 

High Performance Rolling Additives

The high degree of sophistication in the aluminum rolling process has placed higher demands on rolling oils.TPI has adapted to the requirements of the rolling industry by launching a series of hot and cold rolling additive products to meet the needs of advanced rolling processes and products. Among them, AluRoll H series is specially used for hot rolling AluRoll C is a series of high-quality, advanced formulated green additive products, AluRoll SC series is used for cold rolling of aluminum sheet and strip, FC series is used for aluminum foil rolling, and SFC series is a multi-purpose additive product.
The AluRoll EV series is a green formulation for the rolling of battery foils.The Tecrol Digital series is a series of additive concentrates designed to optimize the performance of aluminum rolling in different mills to achieve the required surface finish and product quality in conjunction with the use of factory cold rolled base oils to improve the friction characteristics and performance of cold rolled rolled oils.The Tecrol series is a proven additive product for a wide range of applications. Tecrol series is a widely used and proven additive product.

Non-impregnated lubricants for rolling systems

The mill system has special requirements for the cleanliness of hydraulic oil and bearing oil, and it must be ensured that once leaked into the rolling oil, it will not adversely affect the annealing cleanliness.TPI has developed a full range of non-staining hydraulic oils and non-staining bearing oils by using high-performance synthetic base oils with specific molecular structure and selected additives, including imported fully synthetic products recommended by OEMs, and cost-effective products with high flash point, high shear stability and high load carrying capacity. In addition, there are cost-effective products with high flash point, high shear stability, high wear resistance and high load capacity, which provide reliable lubrication protection for the bearings, gears and hydraulic systems of the rolling system, and at the same time, provide diversified non-impregnated lubrication choices for the users.

Food grade lubricants
TPI is the leading food grade lubricant company in China with both food grade ISO21469 factory certification and NSF H1, H2, HT-1, 3H, HX-1 product certification. With TPI's leading edge in food-grade lubrication, several models of non-staining hydraulic oil and non-staining bearing oil products do not contain toxic or hazardous substances, which will not affect human health during use, and the oils are environmentally friendly, safe and easy to degrade. The oils are environmentally friendly, safe and biodegradable. They comply with the U.S. Food and Drug Administration's (FDA) 21 CFR 178.3570 “Occasional contact of lubricating oils with foodstuffs” and can therefore be used in the hydraulic and gear bearing systems of aluminum strip and foil mills that produce food packaging materials.

Trace lubricants
Micro lubrication products are the first area of TPI's “Green Chemistry, Green Lubrication”. Sawing in the aluminum industry is the best application scenario for green microlubrication. Aluminum processing mostly uses circular saws and band saws to cut flat materials, square materials, round ingots, tubes and profiles, etc., which requires machining precision and surface quality of the saw section; protection of the saw blade to extend its service life; reduction of the amount of lubricant to reduce the cost of use; and keeping the cutting chips dry and pollution-free for easy disposal. TPI has developed a full range of non-staining, biodegradable, micro-lubricants with excellent lubrication, cooling and protection effects, which can be used not only for band saws and circular saws, but also for aluminum and other non-ferrous and ferrous metals, such as cutting, milling, drilling, grinding and other operations.

Aluminum rolling oil purification and oil washing
TPI Aluminum Rolling Oil Purifying Wash Oil is made of selected base oils with specific molecular structure and special additives, which is specially developed to adapt to the cold rolling process of aluminum with a variety of special recycling and washing oil for rolling oil.TPI Aluminum Rolling Oil Purifying Wash Oil is designed to be used in conjunction with the rolling oil recycling circulating system and washing oil purification device to accurately absorb and purify the aluminum rolling oil, reduce the loss of rolling oil and contamination, and reduce the loss of rolling oil, and protect the environment. Protect the environment. 

Fully Synthetic Aluminum Alloy Processing Fluid
SYNCUT series is a fully synthetic long-life grinding and cutting fluid made with green technology, free of sulfur, phosphorus and nitrite, with excellent performance in both hard and soft water, and is specially designed for cutting and grinding operations of aluminum and aluminum alloys. It is recommended for grinding, honing, milling, turning, tapping and other machining processes of various aluminum and aluminum alloy materials, including aerospace aluminum materials, and can be used in a variety of stand-alone and centralized fluid supply systems.
TECGARD series is made of selected low viscosity volatile refined base oils and a variety of additives, it is a low viscosity volatile stamping lubricant that is easy to evaporate and free from cleaning and meets the requirements of environmental protection, it is used for the stamping cooling lubrication of aluminum fins and other precision metal workpieces. It is mainly used for precision stamping of aluminum sheet and strip as well as expanding and bending of aluminum and copper pipe fittings. It is recommended to be used in automobile radiator industry, air conditioning industry, computer manufacturing industry, communication equipment industry, etc., for lubrication of precision strip stamping and pipe fittings in the process of production.